Addition cure encapsulating and potting compound

Addition cure encapsulating and potting compound

Price:
USD 10.28 - 15.98
Port:
shenzhen
Minimum Order:
200 Kilogram
Supply Availability:
600 Ton per Month
Payment Terms:
Credit Card, T/T

Contact Supplier:


Supplier Details

SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD.

Free Member  (2015)

[ shenzhen, GU, China ]

Business Type:  Manufacturer

Supplier has 5 products

Contact Details

Quick Details

Brand:
HongYe silicone
Model:
HY-9055
Origin City:
shenzhen
Origin Country:
China

Packaging and Delivery

Packaging:
1KG,5KGS,20KGS,25KGS,200KGS
Delivery Lead Time:
Within 5 days after receipt full payment

Product Description

Addition cure encapsulating and potting compound

1.Product Feature of Electronic Potting Silicone Rubber

HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)?PP?ABS?PVC, etc. and metal materials.

1.Typical Application of Electronic Potting Silicone Rubber

HY-9055 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.


3. Technical Guidelines of of Electronic Potting Silicone Rubber

a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80?100?, the silicone will cure in 15 minutes; while in 25? room temperature, the silicone will cure around 8 hours.

4.Notes of Electronic Potting Silicone Rubber

a.The following material may hinder the curing of HY-9055, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
b. HY-9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
c. HY-9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.

Technical Parameters of of Electronic Potting Silicone Rubber
Features Part A Part B
Before Curing Appearence Gray Fluid White Fluid
Viscosisty?25 centigrade cps? 2500±500 2500±500
Operation features Mixing Ratio 1?1
Viscosisty(after mixing) ?cps? 2000?3000
Operating Time?25 centigrade  hr? 120
Curing time ?25 centigrade,min? 480
Curing time?80 centigrade  hr? 20
 

After Curing Hardness?Shore  A? 55±5
Thermal conductivity [W?m·K?] >=0.8
Dielectric Strength?KV/mm? ?25
Permittivity?1.2MHz? 3.0?3.3
Volume Resisivity??·cm? ?1.0×1016
linear expansibility [m/?m·K?] ?2.2×10-4
Fire Resistance    94-V1
(Pls note: the above data for this product in 25 ? temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers when using.)

PACKAGE
40Kg/pail as a set (Part A 20Kg + Part B 20Kg)

SHELF LIFE AND TRANSPORTATION
1. Twelve(12) months when stored at 24C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

If you need more information about silicone rubber, pls contact Ms Abbie:
Tel: +86-0755-89311348
Mob: +86-18938867560
Mail:hyab@resinpu.com
Facebook:HYJCY@SZRL.NET
YouTube:silicone0041@gmail.com
QQ:2355542681

Basic Information

Country:
China
Business Type:
Manufacturer
Year Established:
1998
Total Employees:
101 - 500

About Us

Shenzhen Hong Ye Jie Technology Co., Ltd. established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
We have passed ISO9001:2008 Quality Management System. We have two main groups of people, they are: R & D team with is rich in theoretical knowledge and sales team, who is with experience, responsible and skillful workforce and young but promising, and proficient in several languages and with high level of business. With such a team, we promote our silicone rubber to Southeast Asia, Europe, the America and etc, and our silicone rubber is well-received by the customers from more than 50 countries and regions.
Our products include 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant, liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, liquid silicone, hot stamping silicone roller, etc. Our silicone rubber is with good new raw material and various specifications, which is featured with good performance and high reputation.
What you need is what we purse. We are sure that our first class silicone rubber will bring you first class products. We are looking forward to establishing long and good business relationship with you---our new/regular customers from domestic and foreign countries. Let's joint hands to cooperate with mutual benefits!
If you need more information about silicone rubber, pls contact Ms Abbie:
Tel: +86-0755-89311348
Mob: +86-18938867560
Mail:hyab@resinpu.com
Facebook:HYJCY@SZRL.NET
YouTube:silicone0041@gmail.com
QQ:2355542681

Member History

Year Joined:
2015
Membership Type:
Free Member

Send Supplier a Message

You must be signed in to contact this supplier.

Not a Member?

Join Free Now

Already a member? Sign In

Buy on Manufacturer.com

Sell on Manufacturer.com

Community Tools

Company

Click Here to Call Us: 800-928-6710