Off-set Z bracket

No Photo
1000 Piece(s)
Shipping Terms:
Date Posted:

Submit Quote

This RFQ is still accepting quotes. Quote now before it expires or is closed.

Buyer Information

To view this buyer's information please Sign In now.

Product Details

I am looking to have an off-set z bracket/fastener made for me.
It will need to be very attractive.
Just keep in mind,,,the bracket will be used to fasten speakers to there enclosures.
The way speakers are usually fastened is with a screw into wood but with my enclosure being made with marble, the marble would shatter if the screw was drilled as close to the cut-out hole as when they are fastened to wood. The holes must be offset a half an inch or so to keep away from the edge of the cut-out.
See this drawing of a normal speaker cut-out. There looks to be around 11mm where the screw would be fastened in the middle. Leaving the fastening hole about a 3mm or less from the cutout hole, in wood that's ok.

The brackets will be attached the same way but off-set an additional 12-to 14mm into more secure marble.

Here are a few examples. Non are exactly what I need or are attractive enough. I will be wanting black or flat black color over brass or steel.

Thank you,

Buy on

Sell on

Community Tools


Click Here to Call Us: 800-928-6710