Performance Analysis of Compound Crusher in China

No Photo
Quantity:
2 Piece(s)
Shipping Terms:
FOB
Date Posted:
2014-11-26
Expires:
2014-12-26
Status:
Open

Submit Quote

This RFQ is still accepting quotes. Quote now before it expires or is closed.

Buyer Information

To view this buyer's information please Sign In now.

Product Details

Compound crusher or combination crusher is a new product used for fine crushing and primary crushing, which is efficient, energy-saving, less wear and tear. It’s widely used in building materials, chemical industry, metallurgy, electric power, energy and other industries, which is used for crushing brittle materials that is below medium hardness ,such as limestone, cement chamotte and so on.




Structure Characteristic of Compound Crusher in China:

1. The machine is broken than large, biggest broken ratio can reach discharging granularity can be adjusted, and is not affected by plate hammer, liner wear;

2. The elastic adjusting mechanism is used, enter not broken material can automatically discharge, not cause equipment damage;

3. After the cavity with screw or hydraulic open institutions, not the main equipment, wearing parts can be easily replaced;

4. Bearing horizontal layout, long life, can break high temperature materials (such as cement clinker);

5. The screen is set, the broken high moisture content and silt content of material is not easy to jam;

6. Turn the native daughter structure unique, broken material, turn daughter almost don't wear;

The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the machine works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of centrifugal force. Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing roo

Buy on Manufacturer.com

Sell on Manufacturer.com

Community Tools

Company

Click Here to Call Us: 800-928-6710