Model number: GVE-Tplus G.703 E1 to V.35 and ethernet Converter:GVE-Tplus contact:Cenny E-mail:cenny[at]veecom.com.cn MSN:cenny.xu[at]hotmail.com Overview  GVE-Tplus is an upgrade of GVE-T. It is based on the ASIC circuitry design technology. It is a multi-functional, multi-purpose E1/G.703 to V.35 and LAN three-in-one multiplexer, which is also knowns as the three-in-one interface converter.  GVE-Tplus can convert E1 to both V.35 interface and LAN interface. Bandwidth of every port can be set into N*64Kbps(N=1--31) continuous data stream, although the total bandwidth of the two ports must be no more than 31 and must be inserted into PCM time slot of E1. It supports choices of CRC4 ON/OFF and CAS/CCS (30 & 31 time slot). Rate distribution for each port is performed by an independent 5-bit switch.  GVE-Tplus can not only be set up into GVE-T, but also can distribute the whole E1 capacity to V.35 data interface, although E1 must be framed N*64Kbps(N=1--31). The work mode can be either internal clock and slave-clock, or N*64Kbps(N=1--31) external clock to achieve end-linking line.  GVE-Tplus can be set up into long-range Ethernet bridge from V.35 to LAN interface. With low cost, it is suitable for use in bridge connection which is sensitive to cost or use in LAN as a stretcher or subsection. It can learn automatically MAC address in the connected LAN and only transmit the aim address to frame in another LAN. There are more than 10000 addresses in its LAN table. And they can be updated automatically. The highest speed of filtrating and transmission is 30000 frame/second(line speed). The buffer size is 64M. The throughput delay is 1 frame. When it is used as a stretcher or subsection, it can forbid filtration so that all traffic can be broadcasted in WAN. 10baseT interface can run in full duplex Ethernet with topology and improve data throughput by eliminating filled blanks in the 64 bytes frames. Without any negotiation in V.35 port, it is specially suitable for use in satellites and other wireless broadcast.  GVE-Tplus satisfies the requirements of G.703, G.704 and G.706 by ITU  Ethernet UTP interface has VLAN802.1Q function.  GVE-Tplus has two transmission modes to choose from: data and image.  GVE-Tplus has local and remote loopbacks. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test.  I'm Cenny, a sales manager of Bell Data Communication Equipments Co., Ltd , a China local manufacturer . Our products brand is VeeCOM(LANBEL) .   Our major products series are:G.703/E1 to V.35 and ethernet Converters/DSL CPE/ADSL SYSTEM/Multiplexers/Bridges/Modems/Switch/E1&T1 equipment/Fiber Equipment/wireless modem/ADSL modem(The particular products are shown on our website: http://www.veecom.com.cn  or the website in alibaba: http://lanbell.en.alibaba.com/ ). contact:Cenny E-mail:cenny[at]veecom.com.cn MSN:cenny.xu[at]hotmail.com Company: Changzhou Bell Data Communication Equipments Co., Ltd  Website:www.veecom.com.cn Add: 15A Zhongnan Building, NO.33 Guanhe west road, Changzhou, Jiangsu, China  Tel: +86-519-86809961 86809962 86809963 86809965  Fax: +86-519-86809967