Detailed Description  1 Work principle: pneumatic handle works in low frequency (not strenuous resonance) and in four directions to break the fat and draws them out of the body  2 Use less energy than resonance and save 60% physical force, Only need 50 minitues .Up to 10-12 parts at one time,Big volume; the ratio of water and fat is 1:3 3 The postoperative parts are very even due to the sectorial motion. 4 Small blood loss and less injury(the handle can easy destroy the fat and protect the non-fat organization effectively due to the special vibrating way (cyclone pneumatic passage) 5 There is no need to analgetic for the light pain after the operation.Short recovery period 6 No electric element, no electromag-netic radiation and no heat; it wont hurt body; high temperature and press sterilization is available.  7 Pneumatic handle has s long useful life for it works in the way of piston, not be easily damaged.  Technical Parameters :  Dimensions 400 x 420 x 1020 mm Net Weight 22 Kgs Power AC220V ±22V Input Power 350 Watts Voltage Control DC24V Noise ≤45db Aspirator Vaccum Accuracy ≥0.094 mpa Air Pumping Velocity 160 l/min Pneumatic Handle Motion Vibration Frequency 10 Hz Elongation 6 mm Infiltration System Speed 0-300 rpm Flux 1140 ml/min Operation Mode User-friendly Soft Button Control Panel