Product Details  Triple Output * DUAL Voltage, Ampere: DC 30V / 3A, DC-30V / 3A.  * Fixed Voltage, Ampere: DC 5V /   Triple Output * DUAL Voltage, Ampere: DC 30V / 3A, DC-30V / 3A.  * Fixed Voltage, Ampere: DC 5V / 2A.  Output: ON / OFF Control Key Lock: Key Lock to Avoid Error Operation Protection: Overload Voltage, Ampere Protection: (SMPS)  Protect over heat and Overload CC, CV Set: AUTO Set Tracking: AUTO Tracking 14bit Programming and the voltage, the read back of the current.  Programming that can do up and down fast.  High Efficiency and High Power Density Standard Commands for Programmable Instruments (SCPI) .  Setup: Setting and functions may be selected and stored in memory from The front panel. Eight setups may be stored in memory.  Equipment: Displays information about your instrument including the Model Number, serial number, Calibration date, GP-IB address And Firmware revision.  Remote Control: Function and ranges may be controlled from a PC via The RS232 or the optional GP-IB interface.  Display: 128 by 64 pixel Super Twisted LCD display Power Source: May be used with any line voltages from 85V to 270Vac (-10% , 48 to 66Hz) without any internal changes.  The P6100 is a high performance and low cost programmable power supply. It is designed by a high-tech team. This instrument combines the bench-top and system features which provides a versatile solution for your testing requirements now and in the future.  Specifications CHANNEL 3 Channel (Two variable, One fixed)  Output Voltage 0 to 30V (Continuously variable)  0 to-30V (Continuously variable)  Fixed 5V Current Dual 0-3A Fixed 2A Resolution Voltage 10mV Current 1mA Operating Mode Constant Voltage (CV)  Constant Current (CC)  Ripple and Noise 50mV rms Load Regulation 0. 1% (at V = 15V, I = 1A)  Line Regulation 1mV / V Programming Accuracy 0. 5% of value-3 digits Read back Accuracy 0. 2% of value-3 digits