Electrical characteristics:
Rated power: 12V DC/1A
Contact resistance: measurement shall be made at with small current 1000Hz (1A maximum)
Insulation resistance: A voltage of 500V DC shall be applied for 1 minute after which measurement shall be made
Dielectric strength: 500V AC (50 to 60Hz) for 1 minute
Trip current: 2mA
Endurance characteristics: 
Soldering heat test: terminal for a printed circuit board
Temperature of solder: +/- 260 degrees Celsius
Dip time: 5 +/- 1 seconds
The terminal for a lead wire: 
Temperature of solder: 350 +/- 10 degrees Celsius
Dip time: 3 +/- 1 seconds
Cold: the jack shall be stored for 96 hours at a temperature of -25 +/- 3 degrees Celsius immediately after which measurement shall be made
Dry heat: the jack shall be stored for 96 hours at a temperature of 70 +/- 2 degrees Celsius immediately after which measurement shall be made
Contact resistance: 50m Ohms
Insulation resistance: 50m Ohms
Contact pressure: 0.5N (50gf)
Insertion force: 3 to 30N (0.3 to 3.0Kgf)
Withdrawal force: 3 to 30N (0.3 to 3.0Kgf)