Detailed Selling Lead Description

Pls contact Sandra Xu   info(at)wrt-belt(doc)com  haixing.12(at)hotmail(doc)com
Construction
The wedge wire element in a Resin Trap,Strainer is normally a slot tube, but can also be a cylinder. A Resin Trap. Strainer are normally closed on one side and have a flange on the other. They can be made for flow-in-to-out (FITO) or flow-out-to-in (FOTI) filtration. 
Principle
A Resin Trap   Strainer normally serve to retain particles in a process flow. The quantity of particles is normally very low, so that cleaning can be done during flow interruption. 
Application 
A resin trap is normally used: 
To capture expensive resin that escapes from a treatment vessel by accident 
To protect equipment further downstream 
A strainer is often used in tubes to block unwanted particles or dirt that would otherwise damage downstream equipment. Cleaning is carried out by removing the strainer from the tube. 
Advantages
Very precise slots for perfect particle retention combined with minimum obstruction of the process flow. 
Flexibility in design 
Strong construction (self supporting) 
Large open area 
Plug-resistant slot design 

We can also make manufacture according to your detail specifications and we assure that we will give you the best services. 
If you are interested in our products please feel free to contact us and your inquiry will meet with our careful attention.  Haixing Sandra Xu will serve you with best quality products.