This is a combined synopsis/solicitation for commercial items prepared in  accordance with the format in FAR Subpart 12.6, as supplemented with  additional information in this notice. This announcement constitutes the only  solicitation; proposals are being requested and a written solicitation will be  issued as W912LM-05-T-0073, available upon request. W912LM-05-T-0073 is being  issued as a Request for Quotation, which incorporates provisions and clauses  for commercial items in effect through Federal Ac quisition Circular 2005-03.  This acquisition is set-aside for small business. The applicable NAICS code  is 423490. The following supplies are required: CLIN 0001  DIESEL ENGINE  PROGRAM WITH CLOSED LOOP DYNO. (RECYCLED DETROIT DIESEL 60 SERIES ENGINE w /  DDECIV), MFG: Megatch Corporation, MODEL: MEG330DD60  QTY: 1 Each.  Specifications as follows: PROGRAM: To be a late model operational diesel  engine on a special stand, with all the necessary components assembled and  ready for operation with a dual hydraulic, closed loop dynamometer. The  program to consist of: An Operational Diesel Engine with fault insertion,  Engine Test Stand, Full Instrument Panel, Instructional Reference Manual, and  Diesel Engine Hydraulic Dynamometer with Dual System. The ME G330 Diesel  Engine Program introduces the latest in domestic, truck diesel engines  available with Fault Insertion Module. The trainer to have the following  cooling, electric and exhaust systems: COOLING SYSTEM: The cooling system is  to consist of a heav y duty radiator, fan guard and all the necessary hoses  and clamps. Coolant fluid is to be pre-filled ready for operation.  ELECTRICAL SYSTEM: The electrical system to include a heavy duty starter ,  heavy duty capacity alternator, and heavy duty batteries . Battery and fuel  tank to be mounted on a separate steel table free from engine vibrations. The  table is to be constructed from steel channels 1-1/4 x 1-1/4 and covered with  16 gauge steel plates. The table dimensions to be 7-3/4H x 34L x 24W with  a n approximate weight of 20 LBS. INTAKE AND EXHAUST SYSTEM: The system is  to include a protective shield around the flywheel. The exhaust system is  mounted along side the engire and bent around for safely exhausting the  fumes. The intake air filter is m ounted vertically along the radiator and  the engine is supercharged for high performance. ENGINE TEST STAND: The  engine mount to be a heavy duty test stand, constructed from 2 x 2 steel  mechanical tubing frame, 11 gauge heavy wall type, welded at all j oints and  having special pair of universal engine mounts pre-drilled to accept several  different types of engines. The stand is to accommodate a heavy-duty radiator  mount positioned in the front of the engine test stand. The engine test stand  to be posit ioned on specially designed vibration dampers and are to be welded  to the main frame. A total of four sets of vibration dampers are to be  installed. Each set of dampers to have four Toro type pads, held centrally by  a Ѕ bolt and steel plates. The steel mount is to be painted black. On each  of the four corners of the engine mount, wheels are to be provided for easily  rolling the engine to any location. These wheels are to be removable and the  storage space is to be provided on the mount for them. Over all dimensions  are to be 72 L x 24H x 36W and weight to be approximately 150 LBS. FULL  INSTRUMENT PANEL: The instrument panel is constructed from 16 gauge steel,  24W x 26L and is fully wired to the engine control system. A bank of toggle  switches t o be mounted in a lockable protective enclosure whereby the  instructor to be able to fault circuits such as Engine Speed Sensor, CTS, TPS,  MPA and Voltage references. These switches to produce both code and non- coded faults on computer controlled engi nes. INSTRUMENT PANEL TO INCLUDE:  2-1/8 Charge Meter, 3-1/2 Clock-Hour Meter, Throttle Assembly, 3-1/2  Tachometer, On-Off Start Ignition Switch, 2 Water T emperature Gauge 100-280  F, 2 Oil Pressure Gauge 0-100 PSI, 2 Oil Temperature, Gauge 60-260 F.  INSTRUCTIONAL REFERENCE MANUAL: The manuals provide full information and  procedures for troubleshooting diesel engines. Potential problems are listed,  diag nostic methods are indicated and repair procedures detailed. Also to be  included is the manufacturers service manual, to contain detailed procedures,  descriptions and diagrams of the engine provided: Students Manual,  Instructors Guide and Service Manu al. HYDRAULIC DYNAMOMETER: The hydraulic  dynamometer is a compact, quiet and versatile unit for engine testing. The  dyno is rated for the Engines HP peak end. The hydraulic dynamometer and  engine are directly coupled together by means of rigidly mounti ng them to the  engine stand with an adjustable mount. The dynamometer is designed to adapt  to most automotive engines. An optional mounting is available in which the  dyno is mounted directly to the engine. CLOSED LOOP DYNO COOLING: In case  water is not readily available in the shop, a close-looped system is  incorporated for dyno cooling. The system uses a heavy-duty radiator  specially designed for hydraulic cooling. An electrical fan is attached to  the radiator to provide forced air-cooling. The radi ator is mounted to the  engine frame and controlled through a switch on the instrument panel. A  safety system interlock prevents running of the engine without having the  cooling system fan operating. GENERAL REFERENCE MANUALS: These manuals offer  specifi cation for greater depth in diesel performance and are included for  the study of diesel mechanics. SPECIFICATIONS: Size: 8 10 L x 3 W x 5 H  Weight: Approximately 3,000 LBS. CLIN 0002  Shipping Costs associated with  Clin 0001  Qty: 1 Lot. CLIN 0003  SPECIALIZED ELECTRONICS TRAINER, MFG:  Megatech, MODEL: MEGSET-APG2  Qty: 1 Each. SPECIFICATIONS: Size: 16 x  22 (including stand) 4-3/4 high in front, 7 high in back Material: 3/16  Acrylic plastic Mounted in slanted wood stand for desk or tabletop use.  Hinged top allows storage of modules and leads. Plastic has 64 milled holes  for inserting individual modules during training, as well as 8 red and 8 black  jacks for test leads. Fuse: 5 amps 3AG. Power Supply: 12/24 Volt 3 Amp  Fixed Re gulated Supply. Modules Included: All mounted on white acrylic  plastic, with silk screened labeling; Banana plugs on back for inserting and  removing from test board; Lamp 12V, 2W (Quantity: 2); Lamp 12V, 1W (Quantity:  2); Resistor 100 ohm, 2 W; Resistor 200 ohm, 1 W; Resistor 300 ohm, 1 W;  Resistor 100K ohm, Ѕ W; Resistor 300K ohm, Ѕ W; Ohm Potenitometer 100K Vari;  Switch SPST, On-Off; Switch DPDT, On-Off-On; Relay, NO or Nc; 24 Volt Relay  Module (Quantity: 5); Starter Solenoid Module; Condenser 2200 mfd, 470 mfd;  LED 12V, ј W, with resistor; Diode 12V; Zener Diode, 12V; NPN Transistor with  Resistor; PNP Transistor with Resistor; Motor; and Buzzer. Test Leads:  Stackable Banana Leads, 8 Pair Red & Black, 12. Connectors: Set  1  for Open Circuit, 1 for C losed Circuit. Curriculum: 83 Page Notebook  included with explanations, examples, and questions. CLIN 0004  Shipping  Costs associated with Clin 0003  Qty: 1 Lot. CLIN 0005  6 CYLINDER  INTERCOOLER TURBO DIESEL ENGINE CUTAWAY  MFG: Megatech Corporati on, MODEL:  MEGART608  Qty: 1 Each. SPECIFICATIONS: To be a cutaway unit which shows  every component of a 6 Cylinder Intercooler Turbo Diesel Engine. This cutaway  is painted with different colors and shades to better distinguish its  different parts, se ction cuts, fuel, lubrication and cooling systems, etc.  Many parts have been chromium plated or galvanized for a longer life. This  unit is operated at slow speed by a 220V gear motor to better understand and  observe the operation of its mechanical parts. TECHNICAL FEATURES: 4 stroke  engine  6 cylinder in-line, Displacement: 5200 cu. Cm, Direct injection,  Bosch type in-line injection pump with mechanical gov ernor, Intercooler air- air, Geared distribution, Camshaft in crankcase, Spring single-plate clutch,  Fuel fed by turbo supercharger and intercooler, Gearbox: 4 forward speeds +  reverse. SPECIFICATIONS: Dimensions: 32 x 63 x 67 H. Approximate  Weight: 1080 LBS. CLIN 0006  Shipping Costs associated with Clin 0005   Qty: 1 Lot. Payment will be made through Electronic Transfer of Funds.  Successful vendor must be registered with CCR (www.ccr.gov). The following  provisions and clauses apply to this solicitation: FAR 52.212-1, Instructions  to Offers, Commercial Items; FAR 52.212-3, Offerors Representations and  Certifications  Commercial Items; FAR 52.212-4, Contract Terms and  Conditions, Commercial Items; FAR 52.212-5, Contract Terms and Conditions  Required to Implement Statutes or Executive Orders  Commercial Items  (including 52.219-8, 52.219-23, 52.222-21, 52.222-26, 52.222-35, 52.222-36,  52.222-37, 52.222-41, 52.222-42, 52.222-43, 52.232-23); DFAR 252.212-7000,  Offeror Representations and Certifi cations  Commercial Items; DFAR 252.212- 7001, Contract Terms and Condition Required to Implement Statutes or Executive  Orders Applicable to Defense Acquisitions of Commercial Items (including  252.225-7001, 252.243-7002). The Government will evaluate quot es in response  to this request and award a purchase order/contract to the responsible offer  or whose offer conforming to this request, will be most advantageous to the  Government considering price and ability to perform in a timely manner. Award  will be b ased on the best value to the Government in accordance with  procedures in FAR 13.106-2(b). Offers should be submitted to U.S. Property &  Fiscal Office  Minnesota, Procurement Division, Colleen Moore, 15000 Highway  115, Camp Ripley, Little Falls, MN 5634 5-4173 or send to  [Please use the link below] via email. Quotes must be received no later  than 31 August 2005 by 4:30 CDST. Fax transmission of quotes will be accepted  at 320.632.7799. All responsible sources may submit a quote which shall be  consider ed.