Dear Sir, We Are RAQBI Centre a governmental establishment which serves the traditional camel race sport here in the state of Qatar and in all the Middle East. Please visit we are the first to create the camel jockey robot in the world to be used in this sport (we have patent) we also have been making this robot with different local manufacturer and now we would like to explore other options so please read the specification below and see if you have what we need please contact us immediately for more details and explanation and  We need to make  *- A 2 kg remotely controlled robot to be fixed on the camel back and hit the camel back with a rotational hit with a variable 3speeds of 1400rpm, 800rpm, 20rpm. Using a fixable whip. And user's voice should be sent to the Robot at the camel back. *- And we need to make the external plastic body (see the attached photos) to house the robot .Details available. *- For this Robot we need to make the electronics boards for the Transmitter and Receiver, with these specifications.  Specifications of the Electroics: Long range communication device to cover minimum of 1Kilo Meter  No be affected by interference from external noise or strong signals such as near by TV and Radio station ,or airport communications, etc  Multiple Frequency channels, more than thousands  Less Energy Consumption  It should stand vibration such as of a running horse or camel.  It should withstand heat up to 70 degree Celsius.  It should withstand 95% of the Humidity.  Size of the communication board should not exceed 8cm X 12 cm dimensions  Weight should not exceed 100grams for the transmitter and grams for the total board .  There should be five channels each as to be given different functions:  one channel for voice transmission from TX to RX ,one way only  one channel for emergency shut down  three channel for controlling the three different speed of the DC Series motor (the motor used here is same as of DeWalt battery operated cordless Drilling Machine 1400RPM, 40NM ,290W)  There should be a minimum of 50,000 encrypted frequencies. For as many users.  The operation voltage range of the system should be in between 12 and 14 DC V.  The circuit should have an option to control the speed of the motor, depending on requirement, and the adjustable option should be software programmable and download to the board.  The system should withstand high current gradient peak (approximately 50 A) on loading power to the motor as a pulse (in mille seconds), at maximum load.   The circuit should also include DC battery Voltage level indicators (LED type)and it should include function indicator such as (On, standby,transmitting,fault)  There should not be a time delay between transmission and executing the command (real time).  Time between repeating commands should be close to zero (in milliseconds).  Time from command execution and reaching maximum current should be in milliseconds.   Time from stop command to full stop (zero current) should be in milliseconds.  At low voltage performance should be as good as possible.  Sound transmission and speed control command could be sent simultaneously (at the same time), without any delay or command loss.  Best Regards  Elmutaz Hamza Osman  Assistant General Manager  &am;nbp; nbsp; Raqbi Centre