Polyethylene: Grade: XDS34 1. Description: XDS34 is a low density polyethylene designed for a variety of heavy gauge (70-200?m) applications. XDS34 does not contain any additives. Film extrusion additive free, heavy duty. 2. Application: XDS34 is intended for use in heavy gauge (70-200?m) applications such as sacks, pallet wrap and a variety of industrial films. 3. Specifications: If this product is used for food contact applications, then the user needs to ensure compliance with the requirements of AS2070-1999 and relevant FDA regulations. When used in accordance with FDA application guidelines, this product meets the requirements of FDA 21 CFR 177.1520 ( c ) 2.1 and AS2070-1999 section  4. This product should not be used in applications for holding food during cooking without the required compliance testing. This information is only for the Major End Use described on this Product Data sheet.  5. Safely: Material Safety Data Sheets are available for us. Physical Properties: Property Test Method Value Units Base Polymer Properties Mel. Index @ 190? C, 2.16kg Density Typical Film Properties (measured at 110?m. Blow Ratio 3.2 to 1) Haze Gloss Dart Impact(F) Tear Strength MD  TD Tensile Yield MD  TD Tensile Strength MD  TD % Stain at Break MD  TD Stiffness Modulus MD (2% Secant) TD C. O. F ASTM D1238 ASTM D1505 ASTM D1003 ASTM D2457 ASTM D1709 ASTM D1922 ASTM D882 ASTM D882 ASTM D882 ASTM D882 ASTM D1894 0.3 0.922 9.0 68 410 6.8 8.9 9 11 27 20 660 850 160 180 0.4 g/10 min g/cm? % Units G N N MPa MPa  MPa MPa % % MPa MPa Units