Engine Type: 4-cylinder/4-stroke, low vibration, Deutz diesel  Horsepower: 88 @ 2500 rpm (66 kw)  Fuel tank capacity: 30 gallons (114 liters)  Fuel consumption: 3.0 gallons/hour (11.4 liters/hour)  Standard Equipment Tracks: 12 inches (30 cm) wide  Auger conveyor: 144 inches (3.7 meters) 24-inch (61 cm) hydraulic cylinder shift  Mold: Up to 32 inches (81 cm) wide  Hydraulic Right Rear Extension: 24 inches (61 cm) hydraulic  On-board water system: (1200 psi) 75 gallon (284 liters)  Vibrator circuits: 6  Hydraulic vibrators: 2  Proportional electronic controls  Quick release hopper  Hydraulic Adjustable Offset  Carbide tooth trimmer  Performance Maximum sidewalk width: 6-foot offset (1.83 m) or 8-foot center pour (2.44 m)  Maximum barrier/parapet height: 48 inches (122 cm)  Turning radius: 2 feet (60 cm)  Post extension: 36 inches (91cm)  Hydraulic tank capacity: 50 gallons (189 liters)  Speed: Travel: 0 to 75 feet/minute (0 to 23 m/minute)  Pouring: 0 to 50 feet/minute (0 to 15 m/minute)  Auger capacity: .9 cubic yards (.69 cubic m) up to 2.5 cubic yards (1.9 cubic m)/minute  Auger conveyor improves concrete consistency  Trimmer Dimensions Standard cutting width: 42 inches (107 cm)  Optional cutting width: Up to 78 inches (198 cm)  Cutter head diameter: 21  Inches (53 cm)  Maximum trim depth: 6 inches (15 cm)  Lateral shifting: 80 inches (203 cm)  Vertical shifting: 24 inches (61cm)  Overall Dimensions Total length: 210 inches (5.4 m)  Transport width: 102 inches (2.5m)  Height: 102 inches (260 cm)  Net weight: 23, 500 pounds (10,659 kilograms)