This is a combined synopsis/solicitation for commercial items prepared in  accordance with the format in Subpart 12.6, as supplemented with additional  information included in this notice. This announcement constitutes the only  solicitation; quotes ar e being requested and a written solicitation will not  be issued. A faxed copy of this Request for Quote as contained herein will be  provided to all requestors. Quotes are being requested and written  solicitation will not be issued. This solicitation is issued as a Best Value  request for quote (RFQ) W9124B-07-T-0011 using Simplified Acquisition  Procedures under the Test Program at Subpart 13.5. The Government intends to  award to the responsible offeror(s) whose offer conforming to the solicitation  will b e the most advantageous to the government based on the best value.  Offers to this RFQ will be evaluated based on Availability of the requested  requirement, Delivery time, Price. This solicitation document and  incorporated provisions and clauses are those in effect through Federal  Acquisition Circular 2004-25. This is full and open procurement and is under  North American Industry Classification Standards (NAICS) code 332311, the size  standard is $6M. The following clauses and provisions are incorporated and are  to remain in full force in any resultant award: FAR Clause 52.204-9, 52.212- 1, 52.212-2, 52.212-3, 52.212-4, 52.212-5 (dev), 52.246-2, 52-232-23, 52.247- 27, 52.252-1, 252.204-7004, 252.212-7001 , 52.000-4029, 52.204-9, 52.217-8,  52.000-4014. Each offeror shall include a completed copy of the provisions at  FAR clause 52-213-3 Offerors Representations and Certifications-Commercial  Items (2/00) with the quotations, the word document is available for download  with these representations and certifi cations (And also in entire from:  http://farsite.hill.af.mil/). Copies of Clauses in full text may be found at  the following website:  http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_00htm.  If you are quoting an Equal, you must prov ide the manufacturer, part number,  and other requirements prescribed in FAR 52.211-6, Brand Name or Equal, (8/99)  with quote. Offers are due 12 March 2007 at 10:00 AM PST. Contact CPT Jason  Franklin at 380-760-3686 to coordinate for site visits on 8 & 9 March 2007  only. Award shall be made only to contractor who have registered with the  Central Contractor. Registration at: http://www.ccr.gov/ Your offer may be  submitted by email to [Please use the link below] and  lanyard.armstrong@usar.army.mil or via fax at 760-380-3693 and 601-631-6198  respectively. Point of Contact for questions of contractual nature addressed  to Ms. Rosalind M. Whitf ield at (760) 380-6576. REQUIREMENT DESCRIPTION: IN  THE EVENT OF NEEDED REPAIRS RESPONSE TIME SHALL BE WITHIN 4 HOURS AFTER  NOTIFICATION IF MADE BY 4:30 PM OR 0600 IF NOTIFICATION IS MADE AFTER 5:00  PM. POC for delivery and site set is MSG Armstrong POC contact number will  be furnished at time of award. Operations Sand Castle FY07 Requirement #6,  (Clear Span Structures for Billets, DFAC, & MWR/C2 HQ) Clear Span Structures  over existing concrete pads Requirements: deliver, set up and securely mounted  to withstand wind gusts, pick up/insurance/daily service and maintenance to  include weekends and holidays. Delivery date 3 April 2007 and pick up date 8  June 2007. Provide two (2) 270 capacity super series 20m x 35m structures to  be placed over existing concrete pads. Each unit contains 2 entry/exit doors,  metal halide lighting package and (20) 110v electrical outlet drops. This item  is to be delivered (NLT) 3 April 2007 for use, and to be picked up 8 June  2007. The sleeping quarters are to be delivered and erected at the National  Training Center (NTC) Forward Operating Base (FOB) at the following GRID SITE  FOB Site GRID: NU30559758. Living/Dining Structures over graded earth  Requirements: deliver, set up and securely mounted to withstand wind gusts,  pick up/insurance/daily service and maintenance to include weekends and  holidays. Delivery date 3 April 2007 and pick up date 8 June 2007. Provide  (2) two single structures. One with partition (dining and MWR Facility and/or  C2 HQ) and one without partition (living quarters) to be delivered no later  than (NLT) 3 April 2007 for use, and to be picked up 8 June 07. C2 HQ is the  super series 15m x 30m structure w/ min. 3,229 square foot dining section, a  2,153 square foot MWR section, 4 raised wood flooring, entry/exit door for  each section, metal halide lighting package, and (20) 110v electrical outlet  drops. The living, dining & MWR Facility and/or C2 HQ is to be delivered to  the National Training Center (NTC) Forward Operating Base (FOB) at the  following GRID SITES FOB Site GRID: NU30559758 Air Conditioners & Generators  Requirements: deliver, set up and securely mounted to withstand wind gusts,  pick up/insurance/daily service and maintenance to include weekends and  holidays. Delivery date 3 April 2007 and pick up date 8 June 2007. Provide  materials and equipment listed below for two months. Each item/unit needs to  be delivered no later than (NLT) 3 April 2007 for use, and to be picked up 8  June 2007. The AC and generators are to be delivered National Training Center  (NTC) Forward Op erating Base (FOB) Endeavor. FOB Site GRID: NU30559758  Includes power to sleep structures at ten foot intervals along long sides, one  dining/MWR structure, three shower trailers, two restroom trailers, two  laundry trailers and one refer trailer. Air conditioners and generators  (300kw) to power for four struct ures. (18) 20 ton/cooling/50kw heating  vertical style air conditioning 3 April 2007 to 8 June 2007 1ea 750 kw  generator 1ea 320 kw generator 250 each 4\0 x 5\0 camloc power cable 2 ea  400 Amp Distribution Panels 1 ea 200 Amp Distribution Panels Power Generation,  Electrical and Maintenance The contractor shall provide and install lighting,  GFCI protected receptacles and diesel/JP8 powered generators. Lighting  fixtures type shall be metal halide, 400 watt with diffuser/shade or  equivalent industry standard. Each structure requires a minimum of three(3)  lighting fixtures. Contractor will supply 30 ampres of 120volt AC power to  each structure in addition to the required lighting. The 30 ampres of power  shall be distributed through 18 GFCI protected receptacles, installed along  the structure s interior perimeter. Each structure is to have a dedicated  GFCI protected distribution panel installed in its interior. Installed in  each structure shall be an electric exit light unit(s) that displays a  continuous lit red EXIT above each door. Prim ary and backup generators  shall be diesel/JP8 type. Generator will have a minimum run time of 24  hours, under full load, with one full tank of fuel. Primary generator shall  be sized to supply a minimum of 50 ampres, 120 volt, AC power, to each  structur e, 24 hours a day, 7 days per week for duration of contract. Backup  generator size shall be equal in size to primary generator. Backup generator  shall be used in the event of primary generator failure exceeding 8 or more  consecutive hours. Contractor i s to change over primary to backup generator  upon Contracting Officer or Contracting Officer Representatives request. All  electrical connections are to be made in the structures interior, where  possible. Power cables are to be buried, as needed, under roads, access ways  or as designated by the contracting officer. Electrical generation and all  electrical components sha ll meet applicable requirements of the National  Electrical Code (NEC) for temporary out of the doors, wet and windy  locations. All electrical power beneration and any distribution equipment  systems shall be grounded according to NEC requirements. To redu ce downtime  and outages, twist lock connections are required of all 120v AC electrical  wiring and components. Electricians must hav e a minimum of 5 years verifiable  experience in Commercial and Residential electrical work. A Certificate of  Journeyman Status from a registered Labor Union will suffice as evidence of  experience. Maintenance Contractor shall have a designated point of  contact available 24 hours a day, everyday, for duration of contract.  Contractor will be required to respond on site, in person, within 4 hours to  an emergency repair called from the COR. Submit proposed design ated point of  contact information as an attachment along with this solicitation. Regular  scheduled monthly maintenance and inspections shall be performed on all  structures. Each monthly maintenance visit will be scheduled and approved by  the Contracting Officer/COR. Each scheduled trip will include inspection of  the following at a mi nimum: Inspecting and or testing weatherproofing,  stakes, fasteners, flooring, lighting and generation system and Astroturf.  During the trip all structures fabrics shall be inspected, holes will be  patched and/or fabric panels replaced as needed. Light b ulbs/fixtures shall  be replaced as needed. Exit lamps shall be repaired/replaced as needed.  Contractors designated point of contact shall be onsite and available to the  contracting officer during normal work/duty hours, everyday during the  scheduled main tenance period and shall be coordinated with the COR. Regular,  scheduled monthly maintenance shall be performed on all diesel generators.  Diesel Mechanics must have a minimum of 5 years verifiable experience in  Diesel repair and service. A Certificate of Journeyman status from a  registered Labor Union will su ffice as evidence of experience. Diesel  generator service technician is to perform all inspections and maintenance  procedures. Each scheduled trip will include inspection of the following at a  minimum: Inspection of cooling system fan, fan blades, and re mote cooling  fan motor (if so equipped). Inspection of all cooling system hoses, and  adjustment of hose clamps if necessary. Check shut down functions, including  emergency stop for proper operation. Start and run generator set to verify  proper operation of unit. Inspect generator for oil, fuel and coolant  leaks. Check batteries for water level, level of charge and corrosion on  terminals. Check all bulbs in controller for proper operation. Perform  regular oil, oil filter, fuel filter and air filter ch anges according to  generator manufacturers recommendations. At completion of monthly  maintenance/inspection, contractor shall provide completed maintenance record  and then submit to the COR. Contractor is responsible for the collection and  removal of any contractor created waste, rubbish or debris. Contractor is to  submit hazardous waste and waste removal plan as an attachment to this  solicitation.