1. the stairs: It is intended for moving people inside the scaffolding on the tiers. It represents the welded construction consisting of the channels Width, mm: 430 Height, mm: 2275 2. the tie-handrail: It is intended for safety at carrying out of the construction works. It represents the pipe O33 mm with the flattened ends and holes for bracing.  Length, mm3075 3. the tie-diagonal: It is intended for providing stability of the scaffolding racks on a vertical and the rigidity of a scaffolding construction as a whole. It represents the pipe O42 mm with the flattened ends and holes for fastening Length, mm: 3722 4. the crossbar It is intended for installation of the racks on width of scaffoldings. It represents the welded construction consisting of the pipes O48 mm and O33 mm.  Length, mm: 750 5. the adjustable support: It is intended for alignment of rough nesses of the base. A range of regulation is from 1sm up to 35cm. It represents a construction consisting of a screw and a nut.  Width, mm: 430 Height, mm: 630 6. metal deck: The deck is made from the perforated profile; it has the carrying ability equal of 200 KG / m? . It does not demand additional installation of the frames; it creates the horizontal plane, which is intended for disposing people, building materials, tools and other.  Width, mm: 510 Length, mm: 2975 7. the front (saddle) scaffoldings. (The second type that we use) .  The maximal height must be: 60m H*L*W approx: 200mm*200mm*94mm with all accessorizes H*L*W approx: 200mm*300mm*94mm with all accessorizes NOTE: The picture is just example of the scaffoldings that we need; do not need to quote for picture:  We need scaffolding products from the following materials: hot dip galvanized, cold dip galvanized and painted cold dip galvanized.  Please, provide us with all main specifications!