We are looking for the manufacturer of the adjustable handpiece pictured in the attached photos, and also for a manufacturer of adapters for vacuum cleaner hoses and tools. The handpiece is made in two parts, allowing the user to vary the angle between the vacuum hose and an attached tool. The male connection (on the left in the picture) is designed for 1.25" ID tools, and the female end for 1.25" OD hose ends or tubes. The overall length of the handpiece is about 6.5".  We are also looking for a manufacturer of a line of plastic adapters that make it possible to use vacuum cleaner tools with various sizes and/or makes of vacuum cleaner hoses (or handpieces or tubes). An example would be a male-to-male adapter that enables a 1.25" ID tool to be used on a vacuum cleaner that normally uses tools with a 35mm male connector.