Technical Specification   HDPE   1 Material : 100% Virgin PE Material 2 Density,Black ASTM D 1505 : 0.956 gm/cc 3 Tensile Strength @ Ultimate ASTM D638 : 250 psi 4 Tensile Strength @ Yield ASTM D638 : 147 psi 5 Ultimate Elon gation ASTM D638 : over800% 6 Brittleness Temperature ASTM D746 : less than 110 C 7 Hardness, Shore D ASTM D2240 : 60 - 65 8 Softening Temperature ASTM D1525 : 125 C 9 Volume Resistivity ASTM D991 : 10 16 Ω - cm 10 Thermal Expansion Coefficient : 1.7 x 10 16 cm/ cm/ C 11 (a) CALL CLASSIFICATION :ASTM D3350 : 345464 C, D or E (b) MATERIAL CLASSIFICATION : ASTM D1248 : Type III Category 5 12 Frictional Properties and Lubricant : Shall be 0.20 13 Country of Origin : Thailand, Singapore, Malaysia, Indonesia and Myanmar Only. 14 Supply Record : Should be provided for same material according to theSpecification 15 Delivery : Should be 1 month 16 Warranty : 1 Year  The raw material should meet the specs above. If you can ,pls contact me. Thanks in advance.