Do You Know the Technological Process of Jaw Crusher

No Photo
1 Piece(s)
Shipping Terms:
Date Posted:

Submit Quote

This RFQ is still accepting quotes. Quote now before it expires or is closed.

Buyer Information

To view this buyer's information please Sign In now.

Product Details

Jaw crushers needs to be fed an even rate of feed that may resulted in crushing chamber becoming kept full always. This may bring about far more stone-on-stone crushing, lowering the wear for the (jaw die) manganese wear plates, setting up a a lot more cubical item, and bring about far more even wear on the entire jaw die Typically all material smaller compared to the release gap needs to be removed (scalped) until you are fed in to the jaw crusher. This can boost the tons each hour of total production through the plant, and lower wear about the jaw dies. It will lessen fines production and enhance cubical item.Jaw crusher is mainly constitute feed hopper, points feeder, vortex dynamic crushing cavity , impeller, spindle, base hammer broken machines, gearing, stent, etc. The analysis of jaw crusher technological process is as following:First preliminary broken the stone materials by the coarse crusher, then the materials transport to the fine crusher by belt conveyor for further broken . The materials into vibrating screen to sieve two kinds of stones after fine crushing. The materials into the crushing mechanism sand which meet the feeding granularity of jaw crusher, another part of the materials will return into fine crushing. Silmultaneous until the granularity material meet the requirements.A jaw crusher mustn"t be sized on the maximum size rock that could be fed for the plant, but a size that may deal with 95-98% from the material that could be fed for the jaw. Purchasing towards the maximum height and width of rock that could be fed the jaw will lead to investing in a jaw crusher which will be under-utilized, hard to maintain choke-fed, be more pricey than needed, this will let you higher operating price. It"ll cost you much less to setup grizzly bars within the feed hopper to take out the oversize rocks rather than acquire an over-sized jaw crusher. They might then be manually broken,

Buy on

Sell on

Community Tools


Click Here to Call Us: 800-928-6710