CCS Round Wire
Price:
USD 1.00 - 10.00
Payment Terms:
T/T
Contact Supplier:
Supplier Details
ningbo zhenhai beisuda petrochemical equipment co.,ltd
Free Member (2021)
[ Ningbo, ZH,China ]
Business Type: Manufacturer
Supplier has 5 products
Quick Details
Origin Country:
China
Product Description
0.8 Series CCS Round Wire
Origin of new material development
0.8mm series copper-clad round wire is a new type of material developed by our Company to replace pure copper. Because it has the advantages of high strength, low price, high corrosion resistance and high conductivity of copper, and meanwhile its comprehensive performance is high and its cost is more economical than pure copper grounding device, it has been widely used in UHV lines, petrochemical industry, nuclear power and high-speed railway, especially in key projects in recent years.
Copper-clad steel:
The material in which the surface of a steel core is uniformly coated with copper includes copper-clad steel bars for vertical grounding electrode only, copper-clad steel tape, and copper-clad steel wires including round wires and stranded wires. According to the production process, it can be divided into continuous casting copper-clad steel and electroplating copper-clad steel.
Development of copper-clad steel grounding device
With the increasing voltage level of power lines and the increasing capacity of the system, higher requirements are put forward for the safety and reliability of grounding devices.
The traditional method in foreign countries is to use pure copper as the grounding material, but pure copper is expensive and it is a strategic resource, which is not suitable for being massively used as grounding devices in China. From 1910 to 1955, National Bureau of Standards NBS conducted corrosion resistance studies of grounding bodies. 36,500 samples collected at 128 test sites throughout the United States represented 333 metal materials consisting of iron, non-ferrous metals and protective coatings, respectively. The test results show that only steel bars and stainless steel bars with copper plating thickness over 0.5mm can be accepted.
In addition, continue the statistical data of 8 to 30 years and take the test results of 43 copper samples in different soils, 41 of which were calculated, to get the 0.17mm average pitting depth of 30 years. Therefore, some international standards have determined the thickness of copper coating of copper-clad steel material to be at least 0.25 mm. Considering the hard friction during construction, it is suggested that the thickness of copper coating be defined as 0.5-0.8 mm.
In China, copper cladcopperweld steel materials are widely used in substation grounding grids in areas with high soil resistivity. Because of the characteristics of UHV project, such as high voltage level, large capacity and short power cut window period, combined with the corrosion intensity of groundwater in the area, copper-clad steel grounding devices have been applied in UHV lines and many UHV lines in China use copper-clad steel materials as grounding bodies.
Comparison between copper-clad steel grounding and traditional hot-dip galvanized steel grounding device
1. Corrosion rate comparision
Annual corrosion rate of grounding materials in some place of Beijing and Tianjin
Material Beijing Liangxiang Tianjing Dongli
Stainless stell 0.002 0.003
Pure coper 0.001 0.001
Copper-cald stell 0.001 0.001
Galvanized steel 0.176 0.2
The test results show that galvanized steel has the most serious corrosion and its corrosion rate is more than 50 times higher than that of pure copper; the corrosion degree of stainless steel is much lower than that of pure copper and copper-clad steel, showing good corrosion resistance; as a copper-steel composite material, the self-corrosion potential of copper-clad steel in soil is basically the same as that of pure copper, and its corrosion rate is the same as that of pure copper; the corrosion rate of the electroplated copper-clad steel with thinner coating is higher than that of the continuous casting copper-clad steel with thicker coating.
2. Analysis and comparison of physical performance in short circuit
If the conductivity of copper were 100% and the conductivity of standard 1020 steel were only 10.8%, the conductivity of copper would be about 10 times that of steel. However, the conductivity of the 30% conductivity copper-clad round wire would be 30%, and the conductivity of the 40% conductivity copper-clad round wire would be 40%, which would be far better than the steel grounding body. Especially under skin effect, the conductivity of copper-plated strands at high frequencies would be much better than that of steel, that is, the conductivity of copper grounding body would be better than that of steel grounding body. The melting point of copper is 1083? and the maximum allowable temperature during short circuit is 450? ; the melting point of steel is 1510? and the maximum allowable temperature during short circuit is 400?. Therefore, when the grounding body has the same cross section, the copper-clad steel grounding material has better thermal stability.
3. Economic comparison
According to Appendix D of Technical Conditions for Copper-clad Steel for Grounding in Elect
Basic Information
Country:
China
Business Type:
Manufacturer
Year Established:
2009
Total Employees:
51 - 100
About Us
Ningbo Beisuda company is a professional manufacturer of grounding earthing equipment. We specializes in manufacturing copper plated ground rod earth rod, chemical ground rod, exothermic welding powder and Mould, copper clad steel wire or named CCS Wire and other grounding accessories.
Member History
Year Joined:
2021
Membership Type:
Free Member
Send Supplier a Message
You must be signed in to contact this supplier.
