Product Description
The Supercombinata EASY, thanks to its standard equipment, is suitable to perform internal line boring and internal overlay welding within a working range from Ø 32 mm to Ø 250 mm. By means of extra kits, it is suitable to perform external line boring, facing of orthogonal planes and creation of circlips grooves. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.
DIAMETERS
Boring bar diameter: ø 40 x 2200 mm
In line boring: ø 32 – 250 mm
External Line Boring: Extra kit
Internal welding: ø 42 – 250 mm
Facing: Extra kit
ROTATION MOTOR
AC motor: Single phase
Power at rated speed: 1800 W
Output torque at the bar: 290 Nm with 120 rpm
1° speed: max 115 rpm 145 Nm
2° speed: max 400 rpm 45 Nm
FEED MOTOR
Gear motor: DC
Power at rated speed : 90 W
Max speed: 11 rpm
Feed system: Electromechanical
Feed: Manual/Automatic
WELDING TECHNOLOGY
Spiral: Continuous with variable step
Welding machine: Compatible with MIG/MAG welder with EURO connector
LONGITUDINAL STROKE
Unlimited: With 350 mm pitch
ELECTRONIC CONTROL PANEL
Voltage: 220/240 V 50/60 Hz
Main switch: Available
Emergency switch: Available
Inverter feed: RH/LH
Inverter rotation: CW/CCW
Speed regulator: Rotation/Feed
Electrical absorption: 2000 W
Control panel 110/120 V: Upon request
Digital control panel: Upon request
DIMENSIONS
Length: 680 mm
Width: 240 mm
Height: 380 mm
Weight central unit: 36 Kg
STANDARD EQUIPMENT
Qty 1 - Main unit
Qty 1 - Boring machine stand
Qty 1 - Electronic control panel
Qty 1 - Control panel holder
Qty 1 - Cable control panel/machine
Qty 1 - Power cable 220V
Qty 1 - Boring bar ø 40x2200 mm
Qty 1 - Boring bar extension 520 mm
Qty 1 - Pivot
Qty 1 - Tool holder for boring d. 100-250 mm
Qty 1 - Special tool holder LH ø 12x40 mm
Qty 1 - Tool holder LH ø 12x40 mm
Qty 1 - Tool holder LH ø 12x60 mm
Qty 1 - Tool holder RH ø 12x100 mm
Qty 1 - Box with 10 cutting inserts
Qty 2 - Main bar support
Qty 2 - Additional support
Qty 1 - Telescopic shaft for welding
Qty 5 - Diffusor extension 35 mm
Qty 4 - Long gas nozzle
Qty 4 - Short gas nozzle
Qty 5 - Short contact tip ø 0,8 mm wire
Qty 5 - Long contact tip ø 0,8 mm wire
Qty 1 - O-ring for welding shaft 100x5 mm
Qty 1 - Centring system for through holes
Qty 1 - Telescopic gauge up to ø 250 mm
Qty 1 - Dial gauge
Qty 1 - Dial gauge support
Qty 1 - Set of wrenches
Qty 1 - Screws and bolts
Qty 1 - Reduction kit for boring to choose
EXTRA KITS
BORING REDUCTION
KEP00187 Ø 22 - 44 mm 0,87” - 1,73”
KEP00188 Ø 32 - 70 mm 1,26” - 2,76”
FACING
KES00186 Ø 48 - 255 mm 1,89” - 10,04”
OD MACHINING
KEL00202 Ø 100 - 200 mm - D. 200 mm 3,94” - 7,88”
