Electrodynamic Vibration Generator Test Table

LVD-100KG/LVD-100KG-6D Electrodynamic Vibration Generator Test Table is according to IEC 60068, IEC68-2-6, JJG189-97, GB/T13309-91, GB2423 and other relevant standards.



• LVD-100KG: Combined the Vertical and Longitudinal total 4 directions in one test table.

• LVD-100KG-6D: Combined the Vertical, Level and Longitudinal total 6 directions in one test table.



Measurements:

Sine Wave, Frequency Modulation, Sweep Frequency, Programmable, Frequency Doubling, Logarithm, High Acceleration speed, Amplitude Modulation, Time Control, Full-function Computer Control, simple and easy to set the acceleration and amplitude.



Specifications:

• Vibration table size: 500500mm Other size can be designed

• Vibration: 05mm Adjustable range P-P. Vibration waveform: sine wave half wave and full wave. Acceleration speed: 020g Adjustable

• Maximum test load capacity: 100kg

• Accuracy: Frequency can be displayed to 0.01 Hz. Precision: 0.1 Hz.

• Sweep frequency function 1600Hz: Upper frequency, Lower frequency, Time range It can set real standard arbitrarily to sweep frequency back and forth

• Programmable Function 1600Hz: It can set 15 segments in one test with different parameters frequency/amplitude/time/acceleration, and it can be recycled

• Frequency doubling function 1600Hz: 15 segments multiplied-increase:

1Low to high frequency

2High to low frequency

3Low to high and then to low frequency, it can be recycled

• Logarithmic function 1600Hz, 3 modes of logarithm/can be recycled:

1Lower to upper frequency

2Upper to lower frequency

3Lower to upper and then to lower frequency

• Measuring instrument: To display amplitude, acceleration speed and the maximum acceleration speed



Why do we measure vibration

Vibration test is to simulate the various vibration environment impacts encountered by the product in the transportation, installation. This test is to simulate the various impacts encountered by the product in the transportation, installation and use environment. This kind of vibration environmental impact is used to determine whether the product can withstand various environmental vibrations.