TSA-001 sealed plunger actuator Limit Switch

? Stainless steel idler wheel, punch and spring;

? Selective M18x1.5 cable gland.



Ratings

Rated voltage Noninductive Load A Inductive Load A

Resistance Load Lamp Load Inductive Load A Motor Load

NC NO NC NO NC NO NC NO

125VAC 5 5 1.5 0.7 3 3 2 1

250VAC 5 5 1 0.5 3 3 1.5 0.8

8VDC 5 5 3 3 5 4 3 3

14VDC 5 5 3 3 4 4 3 3

30VDC 5 5 3 3 4 4 3 3

125VDC 0.4 0.4

250VDC 0.2 0.2

Inrush Current N.C: below  24A, N.O: below  12A



NOTE: 

1. Inductive load has a power factor of 0.4 min.AC and a time constant of 7 msec.max.DC.

2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.

3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.



Characteristics

Operation speed 0.5mm-50cm/sec

Operating frequency Electical: 30 operations/minute

Contact resistance 25m? max. initial value

Insulation resistance 100M? min. below 500VDC

Dielectric Strength 1000VAC, 50/60 Hz for 1 minute between terminals of the same polarity

1500VAC, 50/60 Hz for 1 minute between current-carrying and non-current-carrying metal parts

1500VAC, 50/60 Hz for 1 minute between each terminal and ground

Vibration 10-55Hz,1.5mm double amplitude

Shock Mechanical durable: 1, 000m/Sec2 about 100G'S

Malfunction: 300m/Sec2 about 30G'S

Ambient Temperature  -10 65? With no icing

Humidity 95% RH

Weight About 195 to 246g

Electrical Life Above 500000

Degree of protection IP65