4 Layer PCB
Price:
USD 1.00 - 100.00
Payment Terms:
T/T
Contact Supplier:
Supplier Details
Zhongfeng Electronics Co., Ltd.
Free Member (2021)
[ Shenzhen, GU,China ]
Business Type: Manufacturer
Supplier has 5 products
Quick Details
Origin Country:
China
Product Description
ZF Electronics was founded in 2003, headquartered in Shenzhen China, the world's most complete electronic supply chain. ZF electronics has been one of the professional pcb manufacturing companies, from prototype to mass production. Our process includes recommending customers to select easy-to-purchase p/n components in the design stage of a new project and purchasing all electronic components, PCB manufacture, PCB manufacturing assembly, testing, and fast delivery to our customers.
4 layer PCB board is laminated on the basis of double-sided PCB, PP and copper foil are added on both sides of the double-sided PCB. Usually, the layout of the4 layer PCB is signal wire-ground wire-power supply-signal.
Production of 4 layer PCB
Cheap 4 layer PCB is made by lamination on the basis of the double sided PCB. During the lamination, copper foil and PP are added to the two sides of the double-sided PCB, and then the 4 layer flex PCB is formed by high-temperature pressing. Some people would ask: what is the difference between double sided PCB and four layer PCB The cropped double sided PCB can be drilled directly on the machine without lamination, while the 4 layer PCB will enter the lamination process after some circuits are etched in the inner layer. Finally, drill holes can be made after lamination.
What are the common rules for designing a 4 layer PCB
1 Line width:
Usually, the signal line is set up 6mil, and the remaining power lines are 5V and 3.3V or it can be set up 10mil, 20mil respectively.
2 Vias:
Normally, there are about 2-3 types of vias on a PCB product. The designed conductor width and conductor spacing should take the production process capability of the 4 layer pcb manufacturer into consideration. If the conductor width and conductor spacing we designed are over the production capacity of the partner, it may increase unnecessary production costs, and even need to change the supplier. Therefore, when designing the conductor width and conductor spacing, we should basically control it at 4/4mil and the via 12mil, then the PCB 4 layer board supplier above 85% are able to put them into production. The conductor width and conductor spacing here refer to the size between elements such as line-to-hole, line-to-line, line-to-pad, line-to-via when setting rules.
The setting rules consider the design bottleneck in the design file. If there is a 1mm BGA chip, its pin depth is relatively shallow, and only one signal line is needed to be set between two rows of pins and it can be set to 6/6mil. If pin depth is relatively deep, two signal lines need to be taken between the two rows of pins and it can set to 4/4mil. If there is a 0.65mm BGA chip, it needs to be changed to HDI blind via design. Generally speaking, if it is larger than the design bottleneck, then the regional rules can be set. Local line width and moment are designed to be smaller and the other places on the board could be larger to facilitate production and improve the qualification rate.
3 Copper foil:
Under normal circumstances, modifications can be made.
If you have questions about our 4-layer PCB production capacity, or the specifications required for your custom project are not listed on this page, please feel free to contact us. We will reply within one workday. We will continue to provide quotation support and design support. Welcome to learn about our production process.
Other PCB Fab
Related Videos
Leave a Message
PCB Market
Related News
FAQs
How to Get a Quotation for PCBA Assembly PCB
Please send BOM?Bill of Material/Components and above mentioned PCB files. It’s better if you could supply finished production photos and full requirement detail images.
What will need for PCB clone service
Please send us the printed circuit board concerned,and also the sharp photos of its front side and the back side.
If you want to know 4 layer pcb price, please contact us.
Basic Information
Country:
China
Business Type:
Manufacturer
Year Established:
2003
Total Employees:
101 - 500
About Us
ShenZhen ZhongFeng Electronic Technology Co., Ltd, founded in 2003 with headquarters in Shenzhen,Professional turnkey PCB PCBA service and One-Stop EMS service,We have obtained ISO9001, ISO13485:2016, IATF16949:2016, IPC-A-610E, UL, RoHS certificationsWe have more than 700 customer all over the world , not only big companies but also individuals and small companies. Our cooperated big customer Including CTS, Tesla, FEV, Delta and Premo etc,We very proud of became American GM supplier in 2018.ZFPCBA main markets are located in Europe, North America and South America and other countries and regions around the world. The main products are mainly consumer electronics, medical equipment, industrial control equipment, automotive electronics and other industriesWe have been in the PCB prototyping and manufacturing field for nearly 20 years history,We are committed to meeting the quality, delivery,cost-effectiveness and other requirements of our customers from different industries. As one of the most experienced PCB manufacturers in China, we will proud of to be your best business partner.We are dedicated to create a company with first-class culture and first image.
Member History
Year Joined:
2021
Membership Type:
Free Member
Send Supplier a Message
You must be signed in to contact this supplier.
