XYC C 220 1KG Grey Lubricant Spray Aerosol Solid Lubricant for Professional Industrial Applications

XYC C 220 is a professional lubricant spray supplied in aerosol form. The source identifies the product as a lubricant spray and describes its chemical nature as a combination of propellant, inorganic binding agent, solvent mixture and solid lubricant. It is intended for professional users.



The formulation contains a solid lubricant component together with an inorganic binding agent and solvent mixture, providing a sprayable lubrication system for surface application. This format allows the lubricant to be applied directly to components where an aerosol spray method is preferred.



The product is a grey aerosol with a characteristic odour. The SDS reports a density of approximately 0.60 g/cm³ at 20°C and water solubility as insoluble. These physical characteristics are useful for identifying and handling the product during professional application.



XYC C 220 is designed for professional use and should be applied in an area with adequate ventilation. The SDS specifically advises avoiding inhalation of vapours or spray mist and avoiding contact with skin and eyes during handling.



As an aerosol product, XYC C 220 requires appropriate storage and handling. The container should be protected from direct sunlight and should not be exposed to temperatures above 50°C. It should also be kept away from flames, sparks and heated surfaces.



The SDS classifies the product as an extremely flammable aerosol and identifies the pressurized container as capable of bursting if heated. Therefore, suitable workplace ventilation, ignition-source control and appropriate personal protective equipment are important during professional application.



The product has a reported flash point of approximately -80°C, while the auto-ignition temperature is reported as above 350°C. These values relate to the physical and chemical properties of the supplied aerosol system and should be considered when establishing storage and application procedures.